Termite Management & Barriers Brisbane
Chemical soil barriers, physical barriers and monitoring and baiting systems for residential and commercial properties across Brisbane Northside and Moreton Bay. Professional termite management recommendations aligned with relevant Australian Standards where applicable.
Termite Management Systems for Brisbane Properties
Termite management systems are designed to reduce the risk of termite entry into a structure and to detect or disrupt termite activity. The appropriate system for a property depends on a range of factors including construction type, site conditions, access limitations and the presence of existing termite activity.
A thorough termite inspection is carried out before any management system is recommended. This allows us to assess the property, identify any existing activity or damage, and recommend the most appropriate management approach for your circumstances.
All termite management work is carried out in accordance with Australian Standard AS 3660.2 — Termite Management: In and Around Existing Buildings and Structures — and relevant product label requirements.
Management Systems Available
- Chemical soil barriers
- Physical barriers (new construction)
- Monitoring & baiting systems
- Residential properties
- Commercial & strata
- AS 3660.2 compliant
Call to book or enquire
Important — Inspection Before Treatment
A termite management system should only be installed following a thorough termite inspection. Installing a barrier over active termites or without identifying existing damage can cause termites to relocate and may make management more difficult. We carry out an inspection before recommending or installing any management system.
Termite Management Systems
The appropriate system depends on your property type, construction, site conditions and circumstances. We assess each property individually and provide a clear recommendation.
Chemical Soil Barriers
A chemical soil barrier involves the application of a registered termiticide to the soil around and beneath a structure to create a treated zone. Termites passing through the treated zone are affected by the product, disrupting colony activity.
Key Points
- Applied to soil around and beneath the structure
- Registered termiticide products used
- Suitable for most property types
- Requires re-treatment at the end of the product's effective life
- Access to the full perimeter is required for a complete barrier
Physical Barriers
Physical barriers are installed during construction to prevent termite entry into a building. They include stainless steel mesh, crushed granite and other materials that termites cannot penetrate or pass through undetected.
Key Points
- Installed during construction — not suitable for existing buildings
- No chemical products required
- Long service life when correctly installed
- Must be installed in accordance with AS 3660.1
- Inspectable — termites must build visible workings to bypass
Monitoring & Baiting Systems
Monitoring and baiting systems involve the installation of in-ground monitoring stations around the perimeter of a property. Stations are checked regularly for termite activity. Where activity is detected, a bait matrix is introduced to disrupt the colony.
Key Points
- In-ground stations installed around the property perimeter
- Regular monitoring checks — typically every 6 to 12 weeks
- Bait introduced where termite activity is detected
- Colony disruption over time
- Ongoing service program required
How We Approach Termite Management
Termite Inspection
A thorough termite inspection is carried out before any management system is recommended. This identifies existing activity, damage, conducive conditions and the most appropriate management approach for your property.
System Recommendation
Based on the inspection findings, property type and your circumstances, we provide a clear recommendation for the most appropriate termite management system. We explain the options, their limitations and what is involved.
Installation & Treatment
The recommended system is installed or applied in accordance with the product label and manufacturer requirements, with work aligned to relevant Australian Standards where applicable. We provide clear documentation of the work carried out.
Ongoing Monitoring
Regular termite inspections and, where applicable, monitoring station checks are recommended following installation. Annual inspections are the minimum generally recommended for properties with a termite management system in place.
Start With a Termite Inspection
A termite management system should always be preceded by a thorough termite inspection. The inspection identifies existing activity, damage and conducive conditions, and informs the recommendation for the most appropriate management approach.
We carry out inspections in accordance with Australian Standard AS 3660.2. Following the inspection, we provide a clear written report and discuss the findings and management options with you.
About Termite InspectionsAnnual Inspections Are Recommended After Installation:
- AS 3660.2 recommends annual inspections
- Confirms ongoing integrity of the management system
- Detects any new activity or conducive conditions
- Identifies if re-treatment is required
- Provides ongoing documented inspection history
Termite Management Questions
Have a question not answered here? Call us or send an enquiry and we will get back to you promptly.
0447 590 962- What is the difference between a termite barrier and a termite inspection?
- A termite inspection is a visual, non-invasive assessment of accessible areas of a property to identify evidence of termite activity, damage and conducive conditions. A termite barrier or management system is a physical or chemical measure installed to prevent termite entry or disrupt termite activity. An inspection is typically carried out before a management system is recommended, and regular inspections are recommended after installation.
- How long does a chemical soil barrier last?
- The effective life of a chemical soil barrier depends on the product used, soil type, environmental conditions and other factors. Most registered termiticide products have a stated effective life of 8 years, though this can vary. The product label and manufacturer documentation will specify the expected effective life. Re-treatment is required at the end of the product's effective life to maintain protection.
- Can a chemical barrier be installed if there are active termites in the property?
- The presence of active termites in a property affects the approach to termite management. In some cases, active termites need to be addressed before a barrier is installed — disturbing active workings can cause termites to relocate and make management more difficult. We will assess the situation and advise on the appropriate approach following a thorough inspection.
- Can a complete chemical barrier always be installed?
- A complete chemical soil barrier requires access to the full perimeter of the structure, including areas under concrete paths, driveways and slabs adjacent to the building. Where access is limited — for example, due to attached structures, concrete paving or neighbouring properties — a complete barrier may not be achievable. In these situations, we will advise on the limitations and discuss alternative or complementary management options.
- What is a monitoring and baiting system?
- A monitoring and baiting system involves the installation of in-ground monitoring stations around the perimeter of a property. Stations are checked regularly — typically every 6 to 12 weeks — for termite activity. Where activity is detected, a bait matrix is introduced into the station. Termites carry the bait back to the colony, disrupting colony activity over time. Monitoring and baiting systems require an ongoing service program to be effective.
- Do I still need annual termite inspections if I have a barrier installed?
- Yes. Annual termite inspections are generally recommended regardless of whether a management system is in place. A termite management system reduces risk but does not eliminate it. Barriers can be breached, damaged or have gaps due to access limitations. Regular inspections allow early detection of any activity and confirm the ongoing integrity of the management system.
- What Australian Standard applies to termite management?
- Termite management in and around existing buildings is governed by Australian Standard AS 3660.2 — Termite Management: In and Around Existing Buildings and Structures. This standard sets out the requirements for termite inspections, management systems and reporting. New construction is covered by AS 3660.1.
Enquire About Termite Management
Call us directly or submit a quote request. We service Brisbane Northside and Moreton Bay.
0447 590 962